Mild Steel Angle is a shape with two flat surfaces that are perpendicular and provide good resistance to bending in any direction. Angles are one of the most common structural steel shapes and are widely used in structures and construction.
MS UNEQUAL ANGLES
A Mild Steel unequal angle is a shape formed with two flat surfaces in such a way that it forms an ‘L’ shape when viewed from the side. In the formation of this angle, one surface is longer than the other. It widely used for constructing buildings, factories, etc.
MS T ANGLES
Mild Steel T angle steel angle is similar to MS angle but it is made by attaching two sheets of steel in a way that when seen from the side, they form a “T” shape. It widely used for constructing buildings, factories, and warehouses.
MS Z ANGLES
The Mild Steel z angle is a Steel Angle made with a single sheet of steel bent in such a way it forms two 90 degree angles in opposite directions. The angle forms a “Z” shape when viewed from the side. It widely used for constructing buildings, factories, etc.
What is Mild Steel (MS)?
Mild steel is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron.
Less carbon means that mild steel is typically more ductile, machinable, and weldable than high carbon and other steels, however, it also means it is nearly impossible to harden and strengthen through heating and quenching. The low carbon content also means it has very little carbon and other alloying elements to block dislocations in its crystal structure, generally resulting in less tensile strength than high carbon and alloy steels. Mild steel also has a high amount iron and ferrite, making it magnetic.
Mild steel is made similar to how other carbon steels are made. A common way this is done involves a combination of iron ore and coal. Once the coal and iron ore are extracted from the earth, they are melted together in a blast furnace. Once melted, the mixture is moved to another furnace to burn off any impurities that they may have, as well as to make any other adjustments to the mild steel’s chemical composition. Following that, the steel is allowed to solidify into a rectangular shape. This slab of mild steel is then usually brought down to the desired size using processes called hot rolling or cold drawing, although there are other methods that can also be used.
Mild Steel Angle is a shape with two flat surfaces that are perpendicular and provide good resistance to bending in any direction. Angles are one of the most common structural steel shapes and are widely used in structures and construction. Mild Steel Angles are used in various construction, engineering and fabrication activities, Mild Steel Angles are the most commonly used steel structural item.